With Xtreme 5.2B, backups are always read at 4x speed. With the faster reading speed, the drive is significantly louder, and may have problems reading cheaper media, but you have the benefit of slightly faster loading times. The read speeds of original discs are unaffected. With Xtreme 5.2A, backups are always read at 12x speed, the same speed as originals. You should select xtrem52a.bin, xtrem52b.bin, xtrem52c.bin, or xtrem52d.bin from the archive you downloaded off Xbins. Hit the Open button to browse your computer and select your firmware. Once you have that taken care of, you can download and install Xtreme Boot Maker. Use either the CD that came with your computer/SATA card, or use the manufacturer's web site to install the drivers. Second, you need to make sure the drivers for your SATA chipset are installed. If you do not have this installed, you will be prompted to download and install it. It is needed for Xtreme Boot Maker to run. First, you need to make sure Microsoft.NET Framework v2 is installed. We will use Xtreme Boot Maker to hex-edit MTKFlash, format the USB drive, and copy the files onto it. Xtreme Boot Maker (USB) The following process will set up a bootable USB flash drive with everything necessary to read your original firmware and write the hacked firmware onto the drive. You can use WinRAR or 7-zip to extract the RAR archive. The hacked firmware can be found in: /XBOX 360/firmware/hacked firmware/Toshiba-Samsung TS-H943/ Simply drag the 'Xtreme52.rar' file over to the left side of FileZilla and wait for it to finish downloading. When filezilla opens up you should see the local Xbins folder on your left side, and a few folders on your right side (this is the FTP server). The program will automatically connect to the IRC channel, message the bot, and connect to the FTP server. Now, go into the 'Xbins' folder on your desktop and run the.bat file. It will ask you where you want to save the files, choose your desktop. Download the self-extracting archive and run the xbins.exe file. If you have never used Xbins before, the easiest method is to use Ground Zero's automated Xbins downloader. Xbins is an IRC channel and FTP server that hosts Xbox and Xbox 360 mod files, homebrew programs, and development software.
The best method to obtain the firmware is by using Xbins. Do not request the firmware on any forums because it is against most forum rules and you will most likely be banned.
The hacked firmware contains portions of Microsoft's copyrighted firmware and therefore cannot be linked to or downloaded publicly. Downloading The Firmware The hacked firmware may be illegal under the DMCA, EUCD, or other local, national, and international copyright laws. Use to make a custom hexedited MTKFlash specifically for your SATA chipset. Note: Even if your chipset is listed as not requiring that MTKFlash be hexedited, it is still probably a good idea to do so.
0 kommentar(er)
